Oki C130n User Manual page 37

INPUT
TRAY
(cont.)
DUPLEX
ORIENTAT
ION
PAGE
RECOVER
Y
Downloaded From ManualsPrinter.com Manuals
Note All factory default values are shown in bold.
AUTO Settings
CONTINUE
If OFF is selected, an error occurs if the size of paper
being printed on is different from the size of paper
specified in the printer driver.
ON
If
printed on is different from the size of paper specified in
the printer driver.
TRAY Settings
CHAINING
If YES is selected and the specified paper tray runs out of
paper during printing, a paper tray loaded with paper of the
same size is automatically selected so printing can
continue.
NO
If
paper, printing stops.
MAP MODE
LOGICAL
TRAY 0-9
Settings OFF/SHORTEDGE/LONGEDGE
If LONGEDGE is selected, the pages will be printed on both sides of the
paper for long-edge binding.
If SHORTEDGE is selected, the pages will be printed on both sides of the
paper for short-edge binding.
Settings PORTRAIT/LANDSCAPE
Specify the orientation of the media.
Settings ON/OFF
Select whether or not the page is printed again after recovering from a
paper misfeed.
If ON is selected, the page that was misfed is printed again.
If OFF is selected, printing continues with the next page without printing
the misfed page.
37 - C130n User's Guide
Paper Menu
ON/OFF
is selected, no error occurs if the size of paper being
YES
/NO
is selected and the specified paper tray runs out of
Settings ON/OFF
Select whether or not the Tray Mapping
function is used.
Settings PHYSICAL TRAY 1/ PHYSICAL
TRAY 2
Specify whether jobs received from another
manufacturer's printer driver are printed using
Tray 1 or Tray 2.
PHYSICAL TRAY 2 is the default only for
LOGICAL TRAY 2. The default for all other
logical trays is PHYSICAL TRAY 1.