Toshiba e-studio 80f Manual page 26

# 160
# 161
# 166
# 167
# 168
# 169
Other error codes
# 201
# 202
# 205
# 206
STOP BUTTON PRESSED
NO RESPONSE
26
The machine is not correctly connected to the
telephone line or there is no signal from the sending
fax machine.
At the end of the reception process the sending fax
machine does not send a signal or the connection
was interrupted.
There are repeated errors in the received data.
The data received contains so many errors that a
second transmission is needed.
At the start of password-protected polling the
machine detects that the wrong password has been
entered on the sending fax machine.
In attempting to poll a fax, the machine detects that
the sending fax machine has not been set up
correctly for polling.
Problem
The correct protocol signal is not sent during the
transmission process.
The correct protocol signal is not sent during the
reception process.
Transmission is canceled by the other fax user.
There is not enough memory capacity during
transmission.
The STOP button was pressed during transmission.
The other fax user does not answer during
transmission and the connection is interrupted.