Usb Charging - Kanto YUMI POWERED SPEAKER User Manual

Bluetooth Operation
1 . If not previously paired, pair your Bluetooth device as described above .
2 . If YUMI has been switched OFF or gone to standby mode, if another device has been
connected to YUMI's Bluetooth input, or if you have disconnected from YUMI's Bluetooth
input, you will need to reconnect by selecting 'YUMI by Kanto' from your device menu .
3 . If another device is connected to YUMI's Bluetooth input, your device will not be able to
connect to YUMI, and you will receive a connection error . Terminate the connection of the
other device first and try to Connect to 'YUMI by Kanto' again .
4 . When you are successfully connected, the Bluetooth LED will be lit solid, and your device
will show as Connected to 'YUMI by Kanto' .
5 . Once connected, you can control the playback from your Bluetooth enabled device using
the second row of buttons on YUMI's remote control .
USB Charging Operation
YUMI features one 5V 1 A USB charging port on the back panel . This is a convenient power
connection to charge your devices .
When YUMI is in Operating Mode (Power LED blue), the port is active, and whatever device is
connected can draw up to 1 A of power . When YUMI is in Standby Mode (Power LED amber),
the USB charging port will automatically turn off .
The USB charging port can be enabled even though YUMI is not operating, by simply pressing
the USB Charge button on the YUMI remote . When in USB Charge Mode, the Power LED will
be off, and the Signal LED will flash twice quickly, followed by a delay, and repeat . Pressing the
USB Charge button on the YUMI remote again will put the unit into Operating Mode .
9
Supporting your digital lifestyle
™