Setup And Use Acronis ® True Image Hd - Kingston Technology SH103S3 Installation Manual

Setup and Use Acronis
IMPORTANT: Always uninstall Trial versions of Acronis software prior to installing a
full version!
1. Insert the Acronis True Image HD software into the system CD-ROM drive.
2. Restart the system.
3. The Acronis True Image HD CD is a bootable disk and will boot to the Acronis True
Image HD screen.
Note: If the system does not boot to the Acronis True Image HD screen and instead
boots to Windows, perform the following:
1) Restart the computer. While the system is restarting, run the system setup
program (BIOS). The BIOS can be activated by pressing a special key such
as ESC, F1, F12 or DELETE. (Refer to your system manufacturer's
documentation for the correct key.)
2) While in the system BIOS, change the boot order so that CD-ROM is the
first boot device.
3) Save the settings and exit BIOS. (For more detailed instructions on
configuring the BIOS, consult your system manufacturer's documentation.)
4) Restart the computer. When the computer restarts, it should now boot to
the Acronis True Image HD page.
®
True Image HD
SSD
Desktop / Notebook
8