Notebook Instructions; Hardware Installation - Kingston Technology SH103S3 Installation Manual

Notebook Instructions

Hardware Installation

Note: Do not install the SSD into the external drive enclosure.
1. Transfer your System Hard Drive to the External Drive Enclosure:
1) Turn off the power to your computer, disconnect the power source and remove the
battery pack from your notebook.
2) Remove the system hard drive from your notebook and disassemble the system drive
bracket. (The system drive bracket will be used later to install the SSD in your
notebook.) Refer to your system manufacturer's documentation for further
instructions.
3) Insert the external system hard drive into the external drive enclosure.
2. Install the SSD into your Notebook and attach the External Drive Enclosure:
1) Assemble the SSD with the system's drive bracket and insert it into the drive bay of
your notebook. Refer to your system manufacturer's documentation for instructions.
2) Using the USB cable provided, attach the system hard drive (installed in the
provided external drive enclosure) to your notebook via any USB port.
3) You are now ready to copy your data from the system hard drive to the SSD using
the cloning software provided.
SSD
Desktop / Notebook
14