Table of Contents
Advertisement
7. Align a 1 gasket between the flanges of the agitation
valve manifold and the adapter fitting for the agitation
throttle valve (C of
8. Assemble the agitation valve manifold, gasket, and
adapter fitting with a clamp tightened hand tight (C of
Figure
87).
9. If you loosened the mounting hardware for the
pressure filter head, tighten the nut and bolt to 1978 to
2542 N-cm (175 to 225 in-lb).
Installing the Section Manifold Valve
1. Insert the upper endcap fitting of the manifold valve
into the bypass fitting (A of
Note: If needed, loosen the mounting hardware for
the bypass valve as needed to provide clearance.
1. Flange (reducer coupling)
2. Socket (bypass fitting)
3. Bypass valve
4. Flange (adjacent
manifold—agitation valve)
5. Endcap fitting (manifold
valve assembly)
2. Secure the endcap fitting to the bypass fitting by
inserting a retainer into the socket of the bypass fitting
(A of
Figure
88).
3. Assemble the outlet fitting onto the lower endcap
fitting of the manifold valve (A of
4. Secure the endcap fitting to the outlet fitting by
inserting a retainer into the socket of the outlet fitting
(A of
Figure
88)
5. Align a 1 gasket between the flanges of the reducer
coupling and the section valve manifold (B of
88).
Figure
87).
Figure
88).
Figure 88
6. Socket (outlet fitting)
7. Retainer
8. Flange (manifold—section
valve)
9. Gasket
10. Flange clamp
Figure
88).
6. Assemble the reducer coupling, gasket, and section
valve manifold with a clamp tightened hand tight ( B of
Figure
7. If installing the 2 left most section valves, align a 1
gasket between the flanges of the 2 adjacent section
valve manifolds (B of
8. Assemble the and 2 adjacent section valve manifolds
and gasket with a clamp tightened hand tight (B of
Figure
9. If you loosened the mounting hardware for the bypass
valve, tighten the nut and bolt to 1017 to 1243 N-cm
(90 to 110 in-lb).
Installing the Valve Actuator
1. Align the actuator to the manifold valve and
77).
2. Secure the actuator and valve with the retainer that you
removed in step
Valve (page 60)
Figure
64
88).
Figure
88).
88).
2
of
Removing the Section Manifold
(Figure
Advertisement
Table of Contents
