Maintenance; Recommended Maintenance Schedule(S) - Toro 41593 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 8 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Maintenance Procedure
• Replace the hydraulic oil filter.
• Torque the wheel lug nuts.
• Change the rear planetary gearbox fluid.
• Check the fan/alternator belt
• Change the engine oil and oil filter
• Check the fuel lines and connections.
• Pack the front wheel bearings.
• Check the tire air pressure.
• Check the engine oil.
• Check the coolant level.
• Check the hydraulic oil level.
• Check the brakes.
• Clean the suction strainer.
• Check the tank straps.
• Check the air cleaner.
• Lubricate the pump.
• Lubricate all grease fittings.
• Check the battery cable connections.
• Lubricate the boom hinges.
• Replace the air filter element.
• Torque the wheel lug nuts.
• Inspect the condition and wear of the tires.
• Check the cooling system hoses for wear and damage.
• Check the fan/alternator belt
• Change the engine oil (including synthetic oil) and oil filter
• Check front wheel toe-in.
• Inspect all hoses and connections for damage and proper attachment.
• Clean the radiator fins.
35