Datavideo AD-100M Quick Start Manual page 8

•
Turn the ADJUST knob to select the DELAY_TIME setting value from 0 ~
700m SEC.
•
Press the ADJUST knob in to save or confirm the chosen setting.
•
The flashing cursor will return to the beginning of this menu option.
•
Rotate the ADJUST knob to choose another menu option or press the
mode button.
3. ATTENUATION
This setting adjusts how loud or quiet the audio will be at the output. 0dB=Loud
and -60dB=Quiet.
NB: The AD-100M is an Audio Delay device and it can also be used as a Tone
Generator. Please DO NOT connect the AD-100M directly to a headset or
set of speakers it should not be used like an Audio AMP.
•
Press the MENU button to enter the system configuration settings.
•
Turn the ADJUST Knob to select ATTENUATION setting.
•
The cursor will flash at the beginning of this menu option.
•
Press MENU button again to move the flashing cursor to the setting
position.
•
Turn the ADJUST knob to select the ATTENUATION setting value from 0 ~
- 60 dB.
•
Press the ADJUST knob in to save or confirm the chosen setting.
•
The flashing cursor will return to the beginning of this menu option.
•
Rotate the ADJUST knob to choose another menu option or press the
mode button.
N.B. The unit will automatically exit the MENU settings mode if it is left
idle for 12 seconds or more.
4. TONE_OUT
This setting switches the TONE_OUT function on or off.
•
Press the MENU button to enter the system configuration settings.
•
Turn the ADJUST Knob to select TONE_OUT setting.
•
The cursor will flash at the beginning of this menu option.
•
Press MENU button again to move the flashing cursor to the setting
position.
•
Turn the ADJUST knob to change the TONE_OUT setting between ON or
OFF.
•
Press the ADJUST knob in to save or confirm the chosen setting.
•
The flashing cursor will return to the beginning of this menu option.
•
Rotate the ADJUST knob to choose another menu option or press the
mode button.
N.B. The test tone will be output at the level set within the TONE_LEVEL
menu option. This test tone will also override any audio source already
being fed through the AD-100M.
8