Conti MONTE-CARLO Technical Documentation Manual
  1. Manuals
  2. Brands
  3. Conti Manuals
  4. Coffee Maker
  5. MONTE-CARLO
  6. Technical documentation manual

Conti MONTE-CARLO Technical Documentation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TECHNICAL DOCUMENTATION
MONTE-CARLO - 11/2015 - SOFT V 2.11
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MONTE-CARLO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Conti MONTE-CARLO

Summary of Contents for Conti MONTE-CARLO

  • Page 1 TECHNICAL DOCUMENTATION MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 2: Table Of Contents

    Electrical power diagram for “230 V 1L N PE” 17.3 17.4 Connecting diagram: 12 fuses box Solid state relay interface for “400 V 3NAC” 17.5 17.6 Low voltage wiring HYDRAULIC SCHEME ALARM POWER MANAGEMENT MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 3: Technical Documents

    Coffee boiler volume 2 x 0.9 3 x 0.9 WEIGHT (kg) EMPTY Weight (Kg) in operation (Kg) 2 DIMENSIONS Cup warmer capacity: (88 espressos cups) or (56 espressos cups + 18 cappucino cups) MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 4: Caution During The Use

     At end of life, this product must be returned to a collection point or returned to an authorized dealer. By doing so, you will help to protect the environment and human health. MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 5: Installation

    The drain pipe must be located lower than the machine.  Do not create a bend in the exhaust tube. 4.5 Supplying voltage  230V – 50/60Hz Monofase To be specify when ordering :  400V – 50/60Hz Trifase Or : MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 6: Water Softeners

    Highly recommended by the manufacturer :  The machines are equipped with suitable protection in accordance with flowrate and the water encountered.  The changing cartridges is carried out by the technical service, at intervals to be determined MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 7: First Installation

    Push "where you want" on the display during wait! 3 sec until: E. Enter the password to access the first installation, as follows: 1° step: Press for 6 seconds MENU 2° step: Press: MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 8 During this time, the air inside coffee groups are automatically vaccum by an opening cycle of vaccum valves, pump and groups valves. G. The process is finished when the display shows: First Install Press H. The display shows: MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 9: Starting & Warm Up

    The leds stay On General display blinking E. When the steam boiler temperature setting is reached (ex.125°C). The machine is ready. All the lights stay On. 95°C 95°C General display shows manometers MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 10  When the machine is ready, the general display shows: Boiler pressure (bar) Pressure (network/pump pressure) Level information (In progress)  Press “where you want” on the display, during 3 sec to switch the machine  The display shows: ON/OFF MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 11: How To Use The Machine

    For that, the valve is coupled to cold water mixing for adjusting the water T° for tea and avoids spitting hot water. Each electric tape is controlled with 2 buttons for 2 different times MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 12: How To Use The Programmed Doses

     The selected dose is shown by a blinking led on the keypad.  The flow can be stopped by repressing: o The same button or o The STOP button (which is also the programming and continuous flow button). MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 13: Coffee Groups

    The "Esc" button is used to escape from the programming mode. MENU ENTER 95°C ORMAL MODE " " MENU MENU Coffee boiler T° Group temperature MENU Dose setting MENU Pre brewing MENU MENU Counters MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 14  Do the same for the others buttons  The continuous is not programmable.  The hot water button (close to the keyboard) is programmable like the coffee dose. " " to validate and "ESC" to escape RESS MENU MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 15: Group Eco Mode

     Prepare the blind filter holder and cleaning tablet  Put it on the group head  Press the "CLEAN" button  The machine starts the cleaning cycle without any special indication. A bar graph indicates the cleaning progress. MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 16: Programming Doses Methodology

    Note : On the factory, each machine undergoes a test protocol on which a program has already been completed, according to the following settings: 1 espresso = 2,5 cl / 2 espressos = 5 cl / 1 coffee = 4,5 cl / 2 coffee = 9 cl MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 17: Hot Water Dose Programming

    Press the “MENU” key: the display shows: Doses setting XX s YY ml  Push hot water key to start the flow, and push again when the water volume is correct.  The timing key is registered. MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 18: General Display

    To access to the complete menu, go to the last step “Password” and enter the good password 10.2.1 Language (*) Language Language English To change the language To validate Next step Available languages : French / English / Italian / Spanish / German / Portuguese MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 19 To select the value Range: 1 to 6 To validate Next step This step is to define the maximum power supply available for the machine. Exemple: 2  Max 22 Amp.(see chapter power management) MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 20 In case of “kit solo” system the machine need to be adjusted with a filling up with pump. 10.2.5.3 Probe sensitivity Probe Sensitivity Probe Sensitivity To select Range: MIN / MID / MAX To validate Next step MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 21 To adjust the value for espresso Adjustable value from 0,5 to 4,5 To validate KF Criteria (ml/s) min 2,5 max 4,5 Next step To adjust the value for coffee Adjustable value from 0,5 to 6 To validate MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 22 To move to the next character To escape To validate 10.2.5.9 Programmation groups Prog. groupes Prog. groups Activated To select To validate To escape To change Prog. groupes Disactivated To select To validate To escape To validate MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 23 To escape To validate 10.2.5.11 Service Alarm Reset Service Alarm Reset Service Alarm Reset To select To validate To escape To change Service Alarm Reset To select To validate To escape To validate MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 24 10.2.5.12 Unit of measurments Unit of measure Next step To escape MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 25 The temperature shown on each coffee group displays will be the real temperature inside the coffee boilers. If the value is « Average»  The temperature shown on each coffee group displays will be an average of the real temperature inside the coffee boilers. MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 26 If the user chooses “Quality criteria”   The viewing during the extraction is this one:  - - -  - - -  YYYml (See more explanations in chapter : coffee quality criteria displayed) MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 27 (the choosen setting temperature is validated for all the groups) To validate To adjust the value To validate and proceed For next step PID setting 8°C To adjust the value Range: 2 to 15°C To validate MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 28 Range: 80 to 125 ° To validate Next step To adjust the value 0.04 10,0 To validate and proceed For next step PID setting To adjust the value 5°C Range: 2 to 5°C To validate MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 29 Range: Mon to Sun Nets step This is the day on which the machine remain switched OFF 2 days are programmable If the value is “OFF”: there is no closed day. To validate MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 30 Range: 0 to 3 sec To validate Next step Delta T. Vap To adjust the value Range: 0°K / 5°K / 10°K To validate of proceed To validate See chapter: Steam control adjustments MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 31 Service cycles Service To adjust the value Range: 0 to 99900 Next step 10.2.16 Water Filter Water Filter Water Filter 5500 To adjust the value Range: 0 to 10000 To validate Next step MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 32 Vaccum valve grp 1: Vaccum valve grp 2: Vaccum valve grp 3: Air valve: Air valve for steam control On / Off: Relay dedicated to supply the light transformer Output On / Off MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 33 Range: Yes / No If Yes If No Data Reset To select Yes or No Completed Next step To validate To validate Switch OFF and switch ON the machine. The machine is reseted. MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 34 Mode Display Display To select Normal Range: Normal/Reverse To validate Contraste To select Range: 0 to 64 On progress Color To choose the color Nets step (come back to the To validate 1°step :language) MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 35 Lighting To select Range: Yes / No Next step When the machine ON: YES : The lights are ON The lights are OFF The lights are always “OFF” when the machine is OFF: MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 36 Alarm history Default n°1 To see the 10 next defaults in memory Next step 10.2.26 Password (*) Password Language Access to the all complete menu Next step (Acces only to steps marked *) MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 37: Coffee Temperature Adjustments

     Concerning the abacus above, these values are given in an indicative way, following the regulation and the especial protocol of the CONTI company. These can change according to the type of coffee used, as well as the environment of the machine.

  • Page 38: Quality Criteria

     Position 5 = flow between 1,02 ml/s and 1,08 ml/s  Position 6 = flow between 1,08 ml/s and 1,14 ml/s  Position 7 = flow between 1,14 ml/s and 1,20 ml/s MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 39: Steam Control Products Adjustments

    The making of the product is stopped. The temperature is stored in the memory. Push on the “MENU” button to escape from the programming. Dose setting Press the coffee « ESC » button. That’s the same procedure for the « hot milk » and the “milk foam » MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 40: Software Version Update

     Press on  Press USB Interface  The machine shows:  Then press  The machine start upgrating software  The display show a decreasing scrollbar: The operation takes about 70 min. MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 41  Switch ON the machine, as soon as the graphic display shows: MONTE CARLO  Press the 3 following keys for 3 seconds Reset completed  When the display shows:  Switch OFF and switch ON the machine  The machine is ready. MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 42: Maintenance Of Machines

    The automatic cleaning process of the group is started in 3 steps: o The process is shown on the display. o The machine asks for blind hold filter and the CONTI cleaning pill code n°466662 o Follow the instructions on the display.
  • Page 43 On the 2 "steam" output and on the 2 "hot water" output o Change the O-ring (No. 061200) o Change the O-ring (No. 055300) For water quality issues, it is recommended to fully drain the boiler. MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 44 On the flowmeter : o Change the non-return valve (No. 415167) Change the silicone tubes evacuation 3-way valves cafes (No. 405621) For water quality issues, it is recommended to fully drain the boiler. MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 45: Electric Designations

    Steam solenoid valve for steam control (option) Bleeding solenoid valves Gr i CODE COULEURS FILS CABLE COLOUR CODE marron brown rouge orange orange jaune yellow vert green bleu blue violet violet gris grey blanc white noir black MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 46: Electric Drawing

    17 ELECTRIC DRAWING 17.1 CPU board MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 47: Electrical Power Diagram For "400V 3L N Pe

    17.2 Electrical power diagram for “400V 3L N PE” MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 48: Electrical Power Diagram For "230 V 1L N Pe

    17.3 Electrical power diagram for “230 V 1L N PE” MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 49: Connecting Diagram: 12 Fuses Box

    17.4 Connecting diagram: 12 fuses box MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 50 MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 51 MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 52 MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 53: Solid State Relay Interface For "400 V 3Nac

    17.5 Solid state relay interface for “400 V 3NAC” MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 54: Low Voltage Wiring

    17.6 Low voltage wiring MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 55: Hydraulic Scheme

    18 HYDRAULIC SCHEME MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 56 MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 57: Alarm

    - No flowmeter 1 pulse after - Check the flowmeter (flashings) Flow meter 1 time out alarm 5 seconds - Check the flowmeter connection - Check the electronic board - Check for clogged coffee group MONTE-CARLO - 11/2015 - SOFT V 2.11...
  • Page 58 - No flowmeter 3 pulse after - Check the flowmeter (flashings) Flow meter 3 time out alarm 5 seconds - Check the flowmeter connection - Check the electronic board - Check for clogged coffee group MONTE-CARLO - 11/2015 - SOFT V 2.11...

  • Page 59: Power Management

    The machine can be connected to a single phase 230V. In this case: 1: Change the power cable with a cable 3x6 ² (Conti reference: 103600) 2: Depending on the available amperage on the grid (16A / 20A / 32A): It is necessary to adjust the power consumption of the machine.
  • Page 60 L a R u c h e - 1 , A v e n u e A l b e r t I I - B . P . 1 1 9 - M C 9 8 0 0 7 M O N A C O C e d e x T é...

Table of Contents

Save PDF