Preparing The Handset - Gigaset C610IP Manual

1
Inserting the supplied batteries and closing the battery cover
>
First insert the tab on the top of the
battery cover in the recess on the
A
housing .
>
Then press the cover until it clicks
B
into place .
>
The display is protected by a plastic film. Please remove the protective film!
2
Connecting the charger and charging the batteries
>
Observe the sequence (A, B)!
B

Preparing the handset

>
>
Once the batteries have been inserted, the handset
switches on automatically.
A
Check the polarity when inserting the batteries
(see symbols in or on the battery compartment).
Use only the rechargeable batteries recom-
mended.
A
>
Place the handset in
the charger and wait
until the batteries
are fully charged
(approx. 10 hours).
>
Do not put the handset back in the
charger until the batteries are fully
discharged through use.
>
After the first battery charge and
discharge, you may place your handset
in the charger after every call.
>
The battery charging status is displayed
in the idle display: = e V U
(empty to full).
B
10 h
5