Gigaset E450 / USA EN / A31008-M17xx-B101-1-19 / starting.fm / 28.3.06
First Steps
Please note:
u
The power adapter must be always
connected, as the phone will not oper-
ate without an electrical connection.
u
If you buy a replacement phone cord
from a store, ensure that the phone
jack is connected correctly.
Correct phone jack assignment
3
2
1
Setting up the handset for use
Fitting the battery pack
Caution:
Use only the rechargeable battery pack recom-
mended by Siemens (page 35). Never use a
conventional (non-rechargeable) battery pack,
as this may cause significant damage to health
and property. For example, the outer casing of
the battery pack could be destroyed or the bat-
tery pack could explode. The phone could also
malfunction or be damaged as a result of using
batteries that are not of the recommended
type. Use of battery packs not authorized by
Siemens may void the warranty on this prod-
uct.
¤
Insert the plug into the socket as shown
in the enlarged view.
¤
Insert the battery pack.
8
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused
¤
Place the cords in the cord routing.
Closing the battery cover
¤
Hold the battery cover at a slight angle
and install the two lower clips into the
casing first. Then close the cover, press
on the top so that it clicks into place.