Preparing The Handset; Inserting The Supplied Batteries And Closing The Battery Cover; Connecting The Charger And Charging The Batteries - Gigaset A510 IP User Manual

1

Inserting the supplied batteries and closing the battery cover

>
First insert the tabs on the top of the
battery cover in the recess on the
A
housing .
>
Then press the cover until it clicks
B
into place .
>
The display is protected by a plastic film. Please remove the protective film!
2

Connecting the charger and charging the batteries

>
Observe the sequence (A, B)!
B

Preparing the handset

>
>
Once the batteries have been inserted, the handset
switches on automatically.
A
Check the polarity when inserting the batteries
(see symbols in or on the battery compartment).
Use only the rechargeable batteries recom-
mended.
A
>
Place the handset in the
charger and wait until
the batteries are fully
charged (approx.
6.5 hours).
>
Do not put the handset back in the
charger until the batteries are fully dis-
charged through use.
>
After the first battery charge and dis-
charge, you may place your handset in
the charger after every call.
>
The battery charging status is displayed
in the idle display: = e V U
(empty to full).
B
6.5 h
5