Starting The Configuration Process; Starting The Voip Wizard - Gigaset C610IP Manual

Configuring the VoIP connection
7

Starting the configuration process

When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the
charger), the message key
If "New firmware available" is shown in the display, updated firmware is already available for
your phone. Press the right-hand display key §Yes§. The new firmware is loaded. This takes approx.
6 minutes. The message key
>
Press the message key
8

Starting the VoIP wizard

IP Wizard
Start IP
installation wizard?
No
>
Press the key below
(= right display key).
If the connection assistant does not start correctly, or if you cancel the connection assistant,
p ¢ Ï ¢
you can start it via the following menu on the handset:
(press right)
f
on the handset flashes.
f
will now flash again.
f
to start configuration.
?
Yes
§Yes§
on the display
Telephony
>
Press the message key
Press the bottom of the control key s
>
to scroll down.
>
Press the
¢
VoIP Wizard
f
on the handset.
IP Wizard
Ð
This wizard helps
you to configure an
IP account and
register it with your
provider so you can - V
OK
§OK§
display key to continue.
9