Gardena SmallCut 300/23 Operation Instructions Manual page 3

Hide thumbs Also See for SmallCut 300/23:
Table of Contents

Advertisement

Do not let the unit become wet with
rain or other moisture. Do not leave
the unit outdoors while it is raining.
Disconnect the mains cable if
the cable becomes damaged or
entangled.
Important
Read carefully before use.
Keep for further reference.
Safe operating practices
Training
a) Read the instructions carefully. Be familiar
with the controls and the correct use of the
machine.
b) Never allow children or people unfamiliar with
these instructions to use the machine. Local
regulations can restrict the age of operator.
c) Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
Preparation
a) Before use check the supply and extension
cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect
the cord from the supply immediately.
DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
Do not use the machine if the cord is damaged
or worn.
b) Before use, always visually inspect the machine
for damaged, missing or misplaced guards or
shields.
c) Never operate the machine while people,
especially children, or pets are nearby.
Operation
a) Keep supply and extension cords away from
cutting means.
b) Wear eye protection and stout shoes at all times
while operating the machine.
c) Avoid using the machine in bad weather
conditions especially when there is a risk of
lightning.
d) Use the machine only in daylight or good
artificial light.
e) Never operate the machine with damaged
guards or shields or without guards or shields
in place.
f) Switch on the motor only when the hands and
feet are away from the cutting means.
g) Always disconnect the machine from the power
supply (i.e. remove the plug from the mains,
remove the disabling device or removable bat-
tery).
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the
machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating
abnormally.
h) Take care against injury to feet and hands from
the cutting means.
i) Always ensure that the ventilation openings are
kept clear of debris.
Maintenance and storage
a) Disconnect the machine from the power supply
(i. e. remove the plug from the mains, remove
the disabling device or removable battery)
before carrying out maintenance or cleaning
work.
b) Use only the manufacturer's recommended
replacement parts and accessories.
c) Inspect and maintain the machine regu larly.
Have the machine repaired only by an
authorized repairer.
d) When not in use, store the machine out of reach
of children.
Recommendation
The machine should be supplied via a resid ual
current device (RCD) with a tripping current of not
more than 30 mA.
Additional Safety Recommendations
Warning! Keep toddlers away when you assemble
the unit. Small parts can be easily swallowed.
There is also a risk that the polybag can suffocate
toddlers.
Warning! When wearing hearing protection, and
due to the noise produced by the unit, the operator
may not notice persons approaching.
If the unit starts unintentionally when the mains
plug is connected, disconnect the mains at once.
Contact GARDENA Service to check the unit.
Warning! This unit makes an electromagnetic field
while it operates. This field may under some con-
ditions interfere with active or passive medical
implants. To decrease the risk of conditions that
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smallcut plus 350/23

Table of Contents