Effect Out; Foot Switch; Phones; Aux In - Phonic Powerprod 1080 User Manual

5

EFFECT OUT

Additional to the built-in effect, user is given the
option to use external effect processor. You can
use this unbalanced 1/4" phone socket to send
signal to external effect processor when the built-
in digital effect is not sufficient enough for the
job. AUX IN then can be used. It can be used
together with AUX IN for " Effect Send" and " Ef-
fect Return " purposes (See Application1 for
more imformation). See Figure 1 for unbalanced
connection.
6

FOOT SWITCH

User can turn activate or deactivate the digital
effect function on PowerPod 1080, 1082 with this
foot switch without using his or her hands. This
frees up his/her hands for other tasks. But make
sure to turn on the DIGITAL EFFECT through the
ON button 21 ; otherwise this switch will not
function.
7

PHONES

This 1/4" TRS phone socket is for user to con-
nect stereo headphones to PowerPod 1080,
1082. The Tip carries the left channel signal
while the Ring carries the right channel and the
sleeve acts as ground.

8 AUX IN

These unbalanced 1/4" phone socket accepts 2-
channel stereo input source. Input signal then
is sent to the MAIN L/R 31 . User can also use
these inputs for as processed signal from exter-
nal effect processor when the built-in effect is
not sufficient enough for the job. Can be used
together with EFX OUT for " Effect Send" and
" Effect Return" purposes (See Application1 for
more imformation). See Figure 1 for unbalanced
connection.
PHONIC CORPORATION
These RCA input jack can connect to any ste-
reo devices such as CD, tape, MD and DAT play-
e r s .

MAIN L/R 31 .

10
These RCA output jack can connect to any ste-
reo devices such as CD, tape, MD and DAT re-
corders.
11
Other than the SPEAKERS output 13 , there
are these unbalanced 1/4" TS sockets for send-
ing line signal to external amplifier or to another
location for monitoring or effect processing pur-
poses. Signal to these sockets is taken out be-
fore it goes to the built-in amplifier but after it
h a s
equalizer 27 .
You may take advantage of these output points:
1) When built-in power amplifiers do not provide
2) When there is a remote location where user
See Figure 1 for unbalanced connection.
POWERPOD1080/1082 USER' S MANUAL
9

TAPE IN

I n p u t s i g n a l t h e n i s s e n t t o t h e

REC OUT

MAIN L/R
g o n e t h r o u g h t h e
enough power for your needs.
would like to send content to.
CONNECTIONS
b u i l t - i n 7 - b a n d
Page 7