Keep this unit away from heat sources such as radiators, heat registers, stoves, etc. This unit contains no user-serviceable parts. Refer all service needs to a qualified service engineer through a Phonic dealer. This triangle on your component alerts you...
TA P E I N C O N T R O L ......7 MASTER CONTROL........7 APPENDIX..........15 TAPE IN AND REC OUT......7 PHONIC CORPORATION POWERPOD408 / POWERRACK408 USER’S MANUAL Page 3...
INTRODUCTION / FEATURES / GETTING STARTED Congratulations on your purchase of the Phonic 1. Before turning on the power, set the Master out- Powerpod408 and Powerrack408 Powered Mixer. put control to the off position. The Powerpod408 is built into a rugged wooden 2.
5 EFFECT This knob decides the signal level which will be sent to the built-in digital delay effect control. Page 6 POWERPOD408 / POWERRACK408 USER’S MANUAL PHONIC CORPORATION...
CD players to be added to the Main output. The RECORD OUTPUT, with RCA phono sockets, provides signal output to a cassette deck and home audio equipment. The nominal output level and impedance are -10dBV/600ohms. PHONIC CORPORATION POWERPOD408 / POWERRACK408 USER’S MANUAL Page 7...
4~8 ohms speaker. The total minimum required load is 4 ohms. If the total load is less than 4 ohms, it may damage this powered mixer. Page 8 POWERPOD408 / POWERRACK408 USER’S MANUAL PHONIC CORPORATION...
SPECIFICATIONS Due to continuous product improvement, the specifications are subject to change without notice. Page 12 POWERPOD408 / POWERRACK408 USER’S MANUAL PHONIC CORPORATION...
APPENDIX REFERENCE BOOKS Phonic recommends the following books for those interested in advanced audio engineering and sound system operation: Sound System Engineering by Don and Carolyn Davis, Focal Press, ISBN: 0-240- 80305-1 Sound Reinforcement Handbook by Gary D. Davis, Hal Leonard Publishing Corporation,...
Need help?
Do you have a question about the POWERRACK 408 and is the answer not in the manual?
Questions and answers