Miscellaneous (Volume/Osd) Setup - Onkyo HT-RC160 Instruction Manual

Advanced Setup—Continued

Miscellaneous (Volume/OSD) Setup

This section explains the items on the "Miscellaneous"
menu.
1 Press the [RECEIVER] button followed by
the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make sure the
appropriate external input is selected on your TV.
2
Use the Up and Down [q]/[w] buttons to
select "6. Miscellaneous", and then press
[ENTER].
The "Miscellaneous" menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3
Use the Up and Down [q]/[w] buttons to
select an item, and then press [ENTER].
The screen for that item appears.
4
Use the Up and Down [q]/[w] buttons to
select an item, and use the Left and Right
[e]/[r] buttons to change it.
The items are explained below.
5 When you've finished, press the [SETUP]
button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Volume Setup
■ Maximum Volume
With this setting, you can limit the maximum volume.
The Maximum Volume range is "Off", 79 to 30.
■ Power On Volume
With this preference, you can specify the volume setting
to be used each time the AV receiver is turned on.
The range is "Last", "Min", 1 to 79 or "Max".
To use the same volume level that was used when the AV
receiver was turned off, select "Last".
The "Power On Volume" cannot be set higher than the
"Maximum Volume" setting.
■ Headphone Level
With this preference, you can specify the headphone vol-
ume relative to the main volume. This is useful if there's
a volume difference between your speakers and your
headphones. The headphones level can be set from –12
dB to +12 dB.
OSD Setup
■ Immediate Display
This preference determines whether operation details are
displayed onscreen when an AV receiver function is
adjusted.
On: Displayed (default).
Off: Not displayed.
Even when "On" is selected, operation details may not
be output if the input source is connected to an HDMI
IN.
■ Display Position
This preference determines where on the screen opera-
tion details are displayed.
Bottom: Bottom of the screen (default).
Top: Top of the screen.
■ Language
This setting determines the language used for the
onscreen setup menus. You can select: English, Deutsch,
French, or Spanish.
77