Basic Operations
Selecting the Input Source
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
1
AV receiver
or
2
3
AV receiver
4
50
MASTER VOLUME
INPUT SELECTOR
Use the AV receiver's input selector buttons to select the input
source.
Remote
controller
To select the input source with the remote controller, press the
[RECEIVER] button, and then press the INPUT SELECTOR but-
tons.
Start playback on the source component.
When you select DVD/BD or another video component, on your TV, you'll
need to select the video input that's connected to the AV receiver's HDMI
OUT, COMPONENT VIDEO OUT or MONITOR OUT.
On some DVD/BD players, you may need to turn on the digital audio output.
To adjust the volume, use the MASTER VOLUME control, or the
Remote
controller
remote controller's VOL [q]/[w] button.
The volume can be set to Min, 1 through 79, or Max.
or
The AV receiver is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 59.
INPUT
SELECTOR
RECEIVER
VOL q/w