Turning Off The Machine - Konica Minolta BIZHUB C203 User Manual

3
– After the machine has finished warming up, the jobs will automatically be printed.
How can the job being printed be stopped?
?
% Press the [Stop] key. For details, refer to "Temporarily stopping scanning/printing" on page 3-67.
!
Detail
While the machine is warming up to begin printing after it is turned on using the [Power] (auxiliary power)
key, copy settings can be specified and an original can be scanned to reserve a copy job. After the
machine has finished warming up, the copies are automatically printed.
The print order can be changed or jobs can be deleted from the Detail screen of a job from the Current
Jobs list in the Job List screen.
3.2.3

Turning off the machine

1
Press the [Power] (auxiliary power) key.
Check that the touch panel is turned off.
2
Open the front door, and then set the main power switch to o.
3
Close the front door.
Reminder
When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to
turn the machine on after turning it off. The machine may not operate correctly if it is turned on
immediately after being turned off.
Do not turn off the machine with the main power switch or the [Power] (auxiliary power) key while it is
making copies or printing, otherwise a paper misfeed may occur.
Do not turn off the machine with the main power switch or the [Power] (auxiliary power) key while it is
scanning or sending or receiving data, otherwise all scan data or transmission data will be deleted.
Do not turn off the machine with the main power switch while a queued job or stored data is waiting to
be printed, otherwise the jobs will be deleted.
!
Detail
The following are cleared when the main power switch and [Power] (auxiliary power) key are turned off.
Settings that have not been programmed
Jobs queued to be printed
3-10
Copy Operations
bizhub C203/C253/C353