Specifying Pages To Be Printed On The Front Side ("Chapters" Function) - Konica Minolta BIZHUB C203 User Manual
Hide thumbs
Also See for BIZHUB C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
3
3.26
Specifying pages to be printed on the front side ("Chapters" function)
When making double-sided copies, the pages specified as the first page of a chapter can be printed on the
front side of the paper. If the original was arranged so that the specified page would be printed on the back
side of a page, the page is left blank and the specified page is printed on the front side of the next page. In
addition, the specified page can be printed on different paper.
!
Detail
A maximum of 30 pages can be specified to be printed on the front side of the paper within an original
of up to 999 pages.
In double-sided originals, one double-sided page is considered to be two pages (one for the front and
one for the back).
Note
Make sure that the paper loaded for the first page of the chapter and for the copy have the same size
and orientation.
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original" on page 3-27.
–
For an original that exceeds 100 pages, refer to "Scanning the original in separate batches
("Separate Scan" setting)" on page 3-30.
3-112
Copy Operations
bizhub C203/C253/C353
Advertisement
Table of Contents
