Part Names And Their Functions; Control Panel - Konica Minolta BIZHUB C203 User Manual

Copy Operations
3 Copy Operations
3.1

Part names and their functions

3.1.1

Control panel

No. Part name
1 Touch panel
2 Main Power indicator
3 [Power] (auxiliary power) key
4 [Mode Memory] key
5 [Utility/Counter] key
6 [Reset] key
7 [Interrupt] key
8 [Stop] key
9 [Proof Copy] key
10 [Start] key
bizhub C203/C253/C353
22
21
20
19
18
17
16
15
14
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Lights up in green when the machine is turned on with the main power switch.
Press to turn on/off machine operations. When turned off, the machine enters
a state where it conserves energy.
Press to register (store) the desired copy/fax/scan settings as a program or to
recall a registered program. (See p. 3-69.)
Press to display the Meter Count screen and the Utility screen.
Press to clear all settings (except programmed settings) entered in the control
panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-
dicator on the [Interrupt] key lights up in green and the message "Now in Inter-
rupt mode." appears on the touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Pressing the [Stop] key while copying, scanning or printing temporarily stops
the operation.
Press to print a single proof copy to be checked before printing a large number
of copies.
Press to start the copy, scan or fax operation. When this machine is ready to
begin the operation, the indicator on the [Start] key lights up in blue. If the in-
dicator on the [Start] key lights up in orange, copying cannot begin.
Press to restart a stopped job.
1
13 12 11 10 9
3
2
3
4
5
6
7
8
3-3