Advertisement
STEP 6
1. Attach the Left and Right lower Handlebar (pt.E-L & E-R) to the Left and Right pedal post (pt.L
& L-2) using two Allen bolt (pt.P-15), four Flat washers (pt.P-16) and two Nylon nuts (pt.P-11).
--- Figure A,B
2. Please remove of the Nylon nuts (pt.F-29), Flat washers (pt.30) and Plastic washers (pt.F-31)
from the Crank connection ----Figure C
3. Attach the Pedal post (pt.L & L-2) onto the Crank
Flat washers (pt.30) and Plastic washers (pt.F-31). --- Figure C
4. Connect the Right rear cover (upper) (pt.M-14) and Right rear cover (lower) (pt.M-15) to the
Left pedal post (pt.L) using screw (pt.P-5). --- Figure D
5. Connect the Left rear cover (upper) (pt.M-12) and Left rear cover (lower) (pt.M-11) to the Right
pedal post (pt.L-2) using screw (pt.P-5). --- Figure D
A
2*
M8
M8*55
8* 16*1T
B
2*
E-L
B
P-5
6*
M3*25
1*
1*
connection
B
13
set using Nylon nuts (pt.F-29),
Advertisement
