Advertisement
STEP 3
1. Connect the Computer cables (pt .D-1) to the Computer (pt.A). Then attach the Computer (pt .A)
to the Computer bracket with the enclosed Screws (pt. A-1).
STEP 4
1. Remove the pre-installed Screws (pt.D-2) on the handlebar post first.
2. Attach the Front handlebar (pt.B) to the Handlebar post (pt.D) using the clamp cover (pt.P-3),
and then fix with two Flat Washers (pt.P-2), two Spring Washers (pt.P-4), two Fixing Bolt
(pt.P-1).
3. Connect the Wire (pt .B-5) to the Computer (pt.A).
4. Assemble the Front post cover (Front & Rear) (M-1 & M-2) to the handlebar post using
Screw (M5x14L) ( D-2), Screw (M3*25) (P).
5. Attach the Cover (Front & Rear) (M-3 & M-4) to the handlebar post (pt.D) using Screw (M3x14L)
( D-2), Screw (M3*25) (pt.P-5).
6. Remove the pre-installed Screws (pt.D-2) on the handlebar post (pt.D), and then assemble the
Bottle holder (pt.M-7) by Screw (pt. D-2).
D-1
A-1
4*
1*
M5*10
P
D-2
P-2
M-1
P-3
P-5
B-5
P-4
M-3
5*
1*
M5*14
2*
1*
7*2T
7*1T
M7*30
2*
1*
M3*14
1*
4*
M3*25
11
P-1
M-2
D-2
D-2
Advertisement
