Advertisement
ASSEMBLY STEPS
STEP 1
1. Attach the Front Stabilizer (pt.J) to the Main Frame (pt.F)
14),Flat washer (pt.P-13) and nuts (pt.P-12).
2. Attach the Rear Stabilizer (pt.J-4) to the Main Frame (pt.F)
14),Flat washer (pt.P-13) and nuts (pt.P-12).
4*
STEP 2
1. Please remove four sets of the M8x16 Allen bolt (pt.F-1) and Semicircle washers (pt.F-3) and
Spring washers (pt.F-2) from the Main Frame (pt.F)
2. Take the Handlebar post (pt.D) and pass it through the Handlebar post cover (pt.F-5).
3. Hold the Handlebar Post (pt.D) and connect the Lower Computer Cable (pt.F-4) and the Upper
Computer Cable (pt. D-1)
4. Slide the Handlebar Post (pt.D) into the Main Frame then fix with four sets of M8x16 Allen bolt
(pt.F-1) and Semicircle washers (pt.F-3) and Spring washers (pt.F-2) from the Main Frame
(pt.F)
.
4*
M8*16L
1*
8*2.4
8*2T
J-4
1*
F-5
D-1
F-4
F-3
F-1 F-2
10
using two M8x55L carriage bolts (pt.P-
using two M8x55L carriage bolts (pt.P-
Advertisement
