Connecting A Dvd Player - Onkyo TX-SR603/603E Instruction Manual

Connecting the AV Receiver —Continued

Connecting a DVD Player

Video Connections
You only need to use one of the following connection
methods.
I Using Composite Video
Use a composite video cable to connect the AV
receiver's V DVD IN jack to the composite video output
on your DVD player, as shown.
DVD player
I Using S-Video
Use an S-Video cable to connect the AV receiver's
S DVD IN jack to the S-Video output on your DVD
player, as shown.
DVD player
I Using Component Video
Use a component video cable to connect the AV
receiver's COMPONENT VIDEO IN1 jacks to the com-
ponent video output on your DVD player, as shown.
• Your TV must also be connected via component video.
DVD player
28
Audio Connections
I Using Coaxial or Optical Connections
• Use a coaxial digital audio cable to connect one of the
OR
• Use an optical digital audio cable to connect one of the
DVD
IN
VIDEO OUT
DVD
Initially, the COAXIAL IN 1 jack is assigned to the
DVD input source. If you connect your DVD player to a
IN
different digital input, you'll need to reassign the DVD
input source (see page 43).
I Using Analog Connections
Even if your DVD player is connected digitally (optical
or coaxial), to use
DVD player, you'll need to make an analog connection
as well.
Use an analog audio cable to connect the AV receiver's
S VIDEO OUT
DVD IN L/R jacks to the analog audio output on your
DVD player, as shown.
If your DVD player has stereo (L/R) and multichannel
outputs, be sure to use the left and right outputs.
COMPONENT VIDEO
IN 1
Y
P
B
P
R
COMPONENT
VIDEO OUT
Y P P
B R
AV receiver's COAXIAL DIGITAL IN jacks to the
coaxial output on your DVD player, as shown.
AV receiver's OPTICAL DIGITAL IN jacks to the
optical output on your DVD player, as shown.
OPTI-
CAL
IN
Connect one or the other
DIGITAL OUT DIGITAL OUT
OPTICAL COAXIAL
DVD player
, or to record audio from your
DVD player
DIGITAL
COAXIAL
IN 1
FRONT
L
R
DVD
R L
AUDIO
OUTPUT