Selecting Listening Modes - Onkyo TX-SR603/603E Instruction Manual

Basic Operations —Continued

Selecting Listening Modes

See "About the Listening Modes" on page 62 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver
STEREO
PURE AUDIO LISTENING MODE
I [PURE AUDIO] button (not North American
TX-SR603)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
I [STEREO] button
This button selects the Stereo listening mode.
I LISTENING MODE [
These buttons select all the listening modes that can
be used with the current input source.
Modes can be selected in the following order,
depending on the input signal format:
➔ ➔
Pure Audio Direct
(e.g., PLIIx, Neo:6, Dolby D EX, DTS/DTS 96/24,
➔
DTS-ES, and so on)
60
] [ ] buttons
➔ ➔
Stereo Mono Surround
Onkyo original DSP
Selecting with the Remote Controller
SURR
PURE A
(not
RC-590M)
DIRECT
I [SURR] button
This button selects the Dolby Digital, Pro Logic IIx,
Neo:6, DTS, and other listening modes.
I [All ST] button
This button selects the All Ch Stereo listening mode.
I [STEREO] button
This button selects the Stereo listening mode.
I [PURE A] button (not North American
TX-SR603)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
I [DIRECT] button
This button selects the Direct listening mode.
I [
DSP] & [DSP ] buttons
These buttons select the Onkyo original DSP modes
and Mono mode.
ALL ST
STEREO
DSP
DSP