First Time Setup - Onkyo TX-SR603/603E Instruction Manual

First Time Setup

This chapter explains the settings that you need to make before using the AV receiver.
Automatic Speaker Setup
With the supplied speaker setup microphone, the Auto-
matic Speaker Setup function can measure the test tone
output by each speaker and automatically determine the
number of speakers connected, their sizes, the distance
from each speaker to the listening position, and so on.
Before using this function, connect and position all your
speakers.
1
3–7
1 Turn on the AV receiver and the
connected TV.
On the TV, select the input to which the
AV receiver is connected.
2
2
Put the speaker setup micro-
phone in the listening position,
and connect it to the SETUP MIC
jack.
MIC
position
Notes:
• Make sure the microphone is hori-
zontal.
• If there's an obstacle between the
microphone and any speaker, the
automatic setup will not work cor-
rectly. Setup the room as you would
when enjoying a DVD.
• If the AV receiver was previously
muted, the Muting function will be
cancelled.
• The automatic setup cannot be used
while a pair of headphones is con-
nected.
• By putting the microphone close to
where your ears would normally be
at the listening position, a more accu-
rate setup can be achieved. If you use
a tripod or level table, you can adjust
the height of the microphone.
39