Advanced Setup; Adjusting The Bass & Treble; Audio Adjust Functions - Onkyo TX-SR603/603E Instruction Manual

Advanced Setup

Adjusting the Bass & Treble
You can adjust the bass and treble for the front speakers,
except when the Direct or Pure Audio (not North Amer-
ican TX-SR603) listening mode is selected.
1 2
1 Press the [TONE] button repeat-
edly to select either Bass or
TONE
Treble.
2 Use the TONE [–]/[+] buttons to
adjust.
+
I Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
I Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
68

Audio Adjust Functions

Here you can set listening mode-related settings and
functions.
1
Press the [RECEIVER] button fol-
RECEIVER
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "4. Audio
Adjust," and then press [ENTER].
ENTER
The Audio Adjust menu appears.
ENTER
3
Use the Up and Down [
buttons to select the settings,
and use the Left and Right [
ENTER
[ ] buttons to set them.
The settings are explained on page 69.
4
When you've finished, press the
[SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
]/[ ]
]/[ ]
]/