Table of Contents
Advertisement
5
Filling the Engine with Oil
Parts needed for this procedure:
0.59 l
SAE 30 or SAE 10W-30 detergent oil with an API
(20 fl
service classification of SF, SG, SH, SJ, SL, or higher
oz)
(not provided with the machine)
Procedure
Important: The machine does not come with oil in the
engine. Before starting the engine, fill the engine with
oil.
1. Move the machine to a level surface.
2. Remove the dipstick (Figure 10).
Figure 10
1. Full mark
2. Drain excess oil
3. Slowly pour oil into the oil fill tube until the oil level
reaches the Full mark on the dipstick (Figure 10). Do
not overfill. Max. fill: 0.59 l (20 fl oz), type: SAE
30 or SAE 10W-30 detergent oil with an API service
classification of SF, SG, SH, SJ, SL, or higher.
4. Install the dipstick securely.
Important: Change the engine oil after the first 5
operating hours ; change it yearly thereafter. Refer
to Changing the Engine Oil (page 14).
G017323
3. Add more oil
Product Overview
15
14
13
12
11
10
1. Blade control bar
2. Upper handle
3. Upper handle knob
4. Ignition key
5. Rear door
6. Fuel tank cap
7. Air filter
8. Cutting height lever (2)
Specifications
Model
Weight
20952
38.56 kg
(85 lb)
7
1
2
3
9
G020272
Figure 11
9. Spark plug
10. Recycling/bagging lever
11. Battery charger
12. Oil fill tube/dipstick
13. Handle knob (2)
14. Grass bag
15. Recoil start handle
Length
Width
79 cm
51 cm
(31.25 in)
(20 in)
Height
41 cm
(16 in)
Advertisement
Table of Contents
