Table of Contents
Advertisement
Figure 18
Figure 19
Note: If the machine does not start after several
attempts, contact an Authorized Service Dealer.
Using the Self-propel Drive
To operate the self-propel drive, simply walk with your hands
on the upper handle and your elbows at your sides, and the
machine will automatically keep pace with you (Figure 20 and
Figure 21).
Figure 20
G020358
Stopping the Engine
Service Interval: Before each use or daily—Ensure that
the engine stops within 3 seconds after
releasing the blade control bar.
To stop the engine, release the blade control bar (Figure 22).
Important: When you release the blade control bar,
both the engine and blade should stop within 3 seconds.
If they do not stop properly, stop using your machine
immediately and contact an Authorized Service Dealer.
Recycling the Clippings
Your machine comes from the factory ready to recycle the
grass and leaf clippings back into the lawn.
Note: The grass bag may remain on the machine while you
are recycling the clippings.
To recycle the clippings, move the Recycling/bagging lever to
the recycling mode (Figure 23).
10
G020275
Figure 21
Figure 22
Advertisement
Table of Contents
