Silent Mode - Philips D630 Extended User Documentation

Example:
Block number = 0123
Incoming call number = 0123456789
The call is blocked.
Block number = 23456789
Incoming call number = 03123456789
The call is not blocked.
Note
•
The contact's name in phonebook will not be displayed
if this contact's number matches the record saved in
the blacklist.
Activate/deactivate the blacklist
1
Select [Menu].
2
Press / to select , then press
[Select].
3
Enter the privacy mode PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
4
Select [Call block] > [Blacklist] > [Block
mode] > [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Create a blacklist
1
Select [Menu].
2
Press / to select , then press
[Select].
3
Enter the privacy mode PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
4
Select [Call block] > [Blacklist] > [Block
number], then press [OK] to confirm.
5
Enter the number, then press [OK] to
confirm.
» The setting is saved.

Silent mode

You can set your phone to silent mode and
enable it for a specific duration when you do
not want to be disturbed. When the silent
mode is turned on, your phone does not ring
and does not sound the key tone and docking
tone.
Note
•
When you press to find your handset, or when you
activate the alarm, your phone still sends alert even
when the silent mode is activated.
1
Select [Menu].
2
Press / to select , then press
[Select].
3
Enter the privacy mode PIN/passcode.
4
Select [Silent mode], then press [OK] to
confirm.
5
Select [On/off] > [On]/[Off], then press
[OK] to confirm.
» The setting is saved.
6
Select [Start & end], then press [OK] to
confirm.
7
Set the time, then press [OK] to confirm.
» The setting is saved.
Note
•
When the silent mode is set to [On],
is displayed during the preset time for the silent
mode.
Exclude the contacts from silent
mode
You can select the length of ring delay and
set the contacts to be excluded from the
phonebook. Ring delay is the number of rings
that will be muted before the rings become
audible on the phone.
1
Select [Menu].
2
Press / to select , then press
[Select].
is displayed.
EN 31