Silent Mode - Philips Faro M775 Series Extended User Documentation

Block anonymous calls
You can block calls without identity in
order to reduce unwanted calls, like
calls from telemarketers.
1
Select [Menu] > [Privacy mode],
then press [OK] to confirm.
2
Enter the privacy mode
PIN/passcode. The default PIN is
0000. Then press [OK] to confirm.
3
Select [Call block] > [Anonymous
call] > [On]/[Off], then press [OK]
to confirm.
» The setting is saved.
Blacklist
You can put numbers into the blacklist
to block incoming calls from certain
undesirable numbers. You can create
4 sets of numbers with 24 digits at
maximum for each set of numbers.
When there is an incoming call with
leading digits that match any one of
these 4 sets of numbers, the ringer will
be muted.
Example:
Block number = 0123
Incoming call number = 0123456789
The call is blocked.
Block number = 23456789
Incoming call number = 03123456789
The call is not blocked.
Note
•
The contact's name in phonebook will
not be displayed if this contact's number
matches the record saved in the blacklist.
Activate/deactivate the blacklist
1
Select [Menu] > [Privacy mode],
then press [OK] to confirm.
2
Enter the privacy mode
PIN/passcode. The default PIN is
0000. Then press [OK] to confirm.
3
Select [Call block] > [Blacklist] >
[Block mode] > [On]/[Off], then
press [OK] to confirm.
» The setting is saved.
Create a blacklist
1
Select [Menu] > [Privacy mode],
then press [OK] to confirm.
2
Enter the privacy mode
PIN/passcode. The default PIN is
0000. Then press [OK] to confirm.
3
Select [Call block] > [Blacklist] >
[Block number], then press [OK] to
confirm.
4
Enter the number, then press [OK]
to confirm.
» The setting is saved.

Silent mode

You can set your phone to silent
mode and enable it for a specific
duration when you do not want to be
disturbed. When the silent mode is
turned on, your phone does not ring
and does not sound the key tone and
docking tone.
EN
35