Phone Settings - Philips D630 Extended User Documentation

13 Phone settings

You can customize the settings to make it your
own phone.
Display settings
You can change the display of the phone during
standby mode.
Set the brightness
You can set the brightness of the handset
screen to different levels.
1
Select [Menu].
2
Press / to select
[Select].
3
Select [Display] > [Brightness], then press
[OK] to confirm.
4
Select an option, then press [OK] to
confirm.
Set the backlight of the LCD screen
You can set the backlight of the LCD screen
and keypad flashing on or off when the phone
rings.
1
Select [Menu].
2
Press / to select
[Select].
3
Select [Display] > [Visual alert], then press
[OK] to confirm.
4
Select [Flashing on]/[Flashing off], then
press [OK] to confirm.
» The setting is saved.
Eco mode
The Eco mode reduces the transmission power
of the handset and base station when you are
on a call or when the phone is in standby mode.
1
Select [Menu].
2
Press / to select
[Select].
, then press
, then press
, then press
3
Select [Eco mode], then press [OK] to
confirm.
4
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
is displayed in standby mode.
»
Note
•
When ECO mode is set to [On], the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the ECO+ mode is activated, it
eliminates the transmission power of the
handset and base station in standby mode.
1
Select [Menu].
2
Press / to select
[Select].
3
Select [ECO+ mode], then press [OK] to
confirm.
4
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
Note
•
Make sure that all the handsets registered to the base
station are D630/D635 in order to have the ECO+
feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to "listen" more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
, then press
EN 27