Select The Recall Duration - Philips D630 Extended User Documentation

Note
•
This is a country dependent feature.
•
To enter a pause, press and hold
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
•
The feature is unavailable if the dialed number starts
with * and #.

Select the recall duration

Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Select [Menu].
2
Press / to select
[Select].
3
Select [Recall time], then press [OK] to
confirm.
4
Select an option, then press [OK] to
confirm.
» The setting is saved.
Dial mode
Note
•
This feature is country dependent and only applies to
models that support both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
1
Select [Menu].
2
Press / to select
[Select].
3
Select [Dial mode], then press [OK] to
confirm.
.
, then press
, then press
4
Select an option, then press [OK] to
confirm.
» The setting is saved.
First ring
Your phone can cancel the first ring before the
caller ID is displayed on the screen. You can
change this setting to suit your preference. This
feature only applies to models with first ring
support.
Turn the first ring on/off
1
Select [Menu].
2
Press / to select
[Select].
3
Select [First ring], then press [OK] to
confirm.
4
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
If you have set the first ring to [Off], the first ring sound
is always muted.
Auto clock
Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Select [Menu].
, then press
EN 41