Controls - Toro 41593 Operator's Manual

Controls

1. Steering wheel
2. Pressure gauge
3. Dash controls
Vehicle Controls
Traction Pedal
The traction pedal (Figure 7) controls the movement of the
machine, both forward and reverse. Using the heel and toe
of the right foot, press the top of the pedal to move forward
or the bottom of the pedal to move in reverse. Release the
pedal to slow and stop.
Important: Ensure that you allow the sprayer to come
to a stop before switching between the Forward and the
Reverse positions.
Note: The farther you press the pedal in either direction, the
faster the sprayer will travel. To obtain maximum forward
speed, set the throttle lever to the Fast position and press the
traction pedal all the way forward.
Note: To get maximum power under heavy load or when
ascending a hill, have the throttle in the Fast position while
pressing traction pedal slightly to keep the engine speed high.
When the engine speed begins to decrease, release the traction
pedal slightly to allow the engine speed to increase.
Figure 6
4. Passenger hand hold
5. Storage compartment
6. Center console
1. Master-boom switch
2. Parking-brake pedal
3. Brake pedal
15
g018928
7. Arm rest
8. Traction pedal
9. Brake
4
3
2
1
Figure 7
4. Traction pedal
5. Ignition switch and key
5
G013753