Toro 41593 Operator's Manual page 18

1
11
10
1. Traction pedal locking
switch
2. Agitation
3. Pump switch
4. Foam marker switch, left
boom (optional)
5. Foam marker switch, right
boom (optional)
6. Boom lift switch, right
boom
Agitation Switch
The agitation switch is located on the control panel to the
right of the seat (Figure 13). Toggle this switch forward to
turn on the agitation in the tank or rearward to stop the
agitation. When the switch is turned on, a light on the switch
illuminates. For agitation to work, the pump must be on and
the engine must be running above an idle. The agitation valve
is located behind the tank (Figure 14)
1
1. Agitation valve
2
3
4
5
6
7
8
9
G013754
Figure 13
7. Boom lift switch, left boom
8. Boom switch, right boom
9. Boom switch, center boom
10. Boom switch, left boom
11. Throttle lever
2
G014346
Figure 14
2. Boom valves
Agitation Bypass Valve
The agitation bypass valve redirects the fluid flow to the
pump when you turn off agitation (Figure 15). It is located at
the back of the agitation valve. You can adjust this valve to
ensure that pressure remains constant during agitation. Refer
to Calibrating the Agitation Bypass Valve (page 27).
G014358
1. Agitation bypass valve
Agitation Control Valve
The agitation control valve is a manual ball valve that controls
flow to the agitation nozzles in the main tank (Figure
16). Using this valve allows the user further control over
pressure at the agitation nozzles of the main tank when larger
application rates are required.
1. Agitation control valve, open
Boom Valves
These valves turn the 3 booms on or off (Figure 14). If you
ever need to manually turn off a boom, rotate the knob on
18
1
Figure 15
1
g018945
Figure 16