Maintenance; Recommended Maintenance Schedule(S) - Toro 30363N Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
Note: Looking for an Electrical Schematic or Hydraulic Schematic for your machine? Download a free copy of the schematic by
visiting www.Toro.com and searching for your machine from the Manuals link on the home page.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1,500 hours
Every 2 years
Maintenance Procedure
• Check the alternator belt tension.
• Torque the frame mounting bolts.
• Torque wheel lug nuts.
• Change the mower deck gear box lubricant
• Change the engine oil and filter.
• Change the hydraulic oil and filter.
• Test the safety system.
• Check the engine oil level.
• Check the engine coolant level.
• Clean the radiator with compressed air (do not use water)
• Check the hydraulic fluid level.
• Check the mower blades.
• Clean the mower deck.
• Grease the bearing and bushing grease fittings.
• Check battery cable connections.
• Check the tire pressure.
• Check the condition of the blade drive belts on the mower deck.
• Check the lubricant in the mower deck gear box.
• Change the engine oil and filter.
• Inspect cooling system hoses and seals. Replace them if cracked or torn.
• Check the alternator belt tension.
• Torque wheel lug nuts.
• Change the mower deck gear box lubricant
• Service the air cleaner.
• Replace the fuel filter canister.
• Check the fuel lines and connections.
• Change the hydraulic oil and filter.
• Inspect engine valve clearance. Refer to your Engine Operator's Manual.
• Replace moving hoses
• Drain and clean the fuel tank.
• Flush and replace cooling system fluid.
33