Product Overview; Controls - Toro GrandStand 74534 Operator's Manual

Product Overview

11
1. Side discharge chute
2. Battery
3. Engine
4. Fuel tank

5. Controls

6. Motion control levers
Controls
Become familiar with all the controls (Figure 4) before you
start the engine and operate the machine.
7
9
G020528
10
Figure 3
7. Operator cushion
8. Platform (down position)
9. Hydraulic tank
10. Mower deck
11. Front caster wheel
4
8
3
2
1. Fuel cap
2. Height-of-cut lever
3. Blade control switch (PTO) 9. Ignition switch
4. Right motion control lever 10. Fuel gauge
5. Left motion control lever
6. Parking brake lever
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance (Figure 5).
Fuel Gauge
The fuel gauge is located on the top, middle of the tank
(Figure 4).
Safety Interlock Indicators
The black triangle symbols on the hour meter indicate which
interlock component is in the correct position (Figure 5).
Battery Indicator Light
If the ignition key is turned to the On position for a few
seconds, the battery voltage will be displayed in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned on
and when the charge is below the correct operating level
(Figure 5).
11
6
5
1
Figure 4
7. Hour meter
8. Choke
11. Throttle control
7
8
9
10
11
G020529