Premaintenance Procedures; Raising The Mower For Access - Toro GrandStand 74534 Operator's Manual

Premaintenance
Procedures

Raising the Mower for Access

The front of the mower can be raised and supported on its
back for access under the machine for maintenance.
1. Raise the platform. Refer to
Operating the Platform (page 18).
2. Remove the battery.
Figure 31
1. Wing nut
2. Battery cover
3. Negative battery cable
3. Drain the fuel from the fuel tank. Refer to
Draining the Fuel Tank (page 34).
4. Remove the cap of the hydraulic tank and place a piece
of plastic over the opening and install the hydraulic cap.
This will seal the hydraulic tank and prevent it from
leaking out.
4. Positive battery cable
5. Battery
1. Cap
2. Piece of plastic
5. With two people, raise the front of the mower so it rests
on the drive tires and the platform in the up position.
6. Perform any maintenance on the machine.
7. With two people, lower the front of the mower to the
ground.
8. Remove the plastic under the hydraulic tank cap.
9. Install the battery for the machine.
26
Figure 32
3. Hydraulic tank