Security - Korenix JetNet 5428G Series User Manual

4.10 Security

JetNet 5428G provides several security features for you to secure your connection. The
Filter Set is also known as Access Control List. The ACL feature includes traditional Port
Security and IP Security.
Following commands are included in this group:
4.10.1 Filter Set (Access Control List)
4.10.2 IEEE 802.1x
4.10.3 CLI Commands of the Security
4.10.1 Filter Set (Access Control List)
The Filter Set is known as Access Control List feature. There are 2 major types, one is
MAC Filter, it is also known as Port Security in other JetNet series. It allows user to define
the access rule based on the MAC address flexibility. Another one is IP Filter. It includes
the IP security known in other JetNet series, IP Standard access list and advanced IP
based access lists.
ACE is short of Access Control Entry, user defines the Permit or Deny rule for specific
IP/MAC address or IP groups by network mask in each ACE. One ACL may include
several ACEs, the system checks the ACEs one after one and forward based on the result.
Once the rules conflict, the old entry is selected as the forward rule.
Type the Name when select MAC Filter, type ID/Name when select IP Filter. The ID for IP
access list is listed as below of the field. Click Add to add the rule. Click Edit to edit the
content for the rule. After configured, click Apply to apply all the rules. Reload to reload
setting. Remove to remove one of the entries.
116