Figure 56
1. Bypass fitting
Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (B of
Figure
Figure 57
1. Valve open
2. Remove the 2 endcap fitting assembly from each end
of the manifold body
2. Section valve manifold
57).
2. Valve closed
(Figure 58
and
Figure
59).
Agitation Valve Manifold
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem capture retainer
5. Endcap fitting
6. Endcap seal O-ring (0.796
inch / 0.139 inch)
57
Figure 58
7. Back seating O-ring (0.676
inch / 0.07 inch)
8. Valve seat ring
9. Mainfold body
10. Ball valve
11. Endcap fitting assembly