Toro 41188 Operator's Manual page 56

Figure 53
1. Flanged-head bolt
2. Manifold (master boom
valve)
Removing the Section Manifold Valve
1. Remove clamps and gaskets that secure the manifold
for the section valve
valve (if left section valve, and the reducer coupling).
Figure 54
1. Flange (reducer coupling)
2. Manifold (section valve)
3. Flange (adjacent section
valve)
2. Remove the retainers that secure the outlet fitting to
the section valve manifold and the valve manifold to
the bypass fitting (Figure
3. Valve mount
4. Flanged locknut
(Figure 54) to the adjacent section
4. Gasket
5. Flange clamp
55).
1. Retainer
2. Socket (bypass fitting)
3. For the left or right boom section valves, remove the
flanged-head bolts and flanged locknuts that secures
the section valve(s) to the valve mount and remove the
valve manifold(s) from the machine; for the center
section valve, remove the section valve manifold from
the machine (Figure
56
Figure 55
3. Socket (outlet fitting)
4. Manifold valve assembly
56).