Driving Forward Or Backward - Toro GrandStand 74534TE Operator's Manual

g020804
Figure 21
1. Platform up
2. Platform down

Driving Forward or Backward

The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the Fast position for best performance. Always operate in the
full-throttle position when mowing.
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
Slow the machine down before making sharp turns.
Driving Forward
1. Release the parking brake; refer to
Parking Brake (page
2. Move the right side motion-control lever to the center,
unlocked position.
3. Pull the knob out to release
the platform.
Releasing the
18).
3
2
1. Front reference bar
2. Left control lever
3. Rear reference bar
3. To go forward, move the speed-control lever to the
desired speed.
4. Slowly push the motion-control levers forward
23).
Note: The engine will kill if a motion-control lever is
moved with the parking brake engaged.
Note: The farther you move the motion-control levers
in either direction, the faster the machine will move
in that direction.
Note: To stop, pull the motion-control levers back to
the neutral position.
23
2
1
4
5
4
G020531
Figure 22
4. Right control lever
5. Right control lever in the
neutral-lock position
(Figure