Release The Cushion For Rear Access - Toro GrandStand 74534TE Operator's Manual

Figure 35
1. Remove battery
Release the Cushion for Rear
Access
The cushion can be released for rear access to the machine
for maintenance or adjustment.
1. Lower the platform.
2. Remove the hairpin-cotter pins on each side of the
cushion.
3. Slide the large washers with plastic bushings to the
inside.
4. Remove the cushion and lower it to the platform.
5. Perform any maintenance or adjustment on the
machine.
6. Raise the cushion and slide it onto the pins on both
sides of the machine
7. Slide the large washers with plastic bushings into the
cushion bracket and secure them with a hairpin-cotter
pin (Figure 36).
2. With 2 people, lift the front
end of the mower (ensure
the platform is up)
(Figure 36).
1
3
31
2
4
Figure 36
g012572