Release The Cushion For Rear Access - Toro GrandStand 74534TE Operator's Manual

Figure 35
1. Remove battery
Release the Cushion for Rear
Access
The cushion can be released for rear access to the
machine for maintenance or adjustment.
1. Lower the platform.
2. Remove the hairpin cotter pins on each side of the
cushion.
3. Slide the large washers with plastic bushings to the
inside.
4. Remove the cushion and lower it to the platform.
5. Perform any maintenance or adjustment on the
machine.
6. Raise the cushion and slide it onto the pins on both
sides of the machine (Figure 36).
7. Slide the large washers with plastic bushings into
the cushion bracket and secure them with a hairpin
cotter pin (Figure 36).
2. With two people, lift the
front end of the mower
(ensure the platform is up)
1
3
31
2
4
Figure 36
g012572