Maintenance; Recommended Maintenance Schedule(S) - Toro 30864 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 250 hours
Every 400 hours
Every 800 hours
Every 3,000 hours
Every 6,000 hours
Before storage
Every 2 years
Maintenance Procedure
• Torque the wheel lug nuts to 94 to 122 N-m (70 to 90 ft-lb).
• Torque the wheel lug nuts to 94 to 122 N-m (70 to 90 ft-lb).
• Check the alternator belt tension.
• Check the engine oil level.
• Check the cooling system.
• Check the hydraulic fluid level.
• Check the operation of the interlock switches.
• Remove debris from the screen and radiator/oil cooler (more frequently in dirty
operating conditions).
• Check the hydraulic lines and hoses for leaks, kinked lines, loose mounting supports,
wear, loose fittings, weather deterioration, and chemical deterioration.
• Grease the bearings and bushings. (Grease them immediately after every washing
regardless of the interval listed.)
• Check the condition of and clean the battery.
• Check the battery cable connections.
• Inspect the cooling system hoses.
• Check the alternator belt tension.
• Torque the wheel lug nuts to 94 to 122 N-m (70 to 90 ft-lb).
• Change the engine oil and filter.
• Service the air cleaner. (Service the air cleaner earlier if the air cleaner indicator
shows red. Service it more frequently in extremely dirty or dusty conditions.)
• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Replace the fuel filter canister.
• Replace the engine fuel filter.
• Drain and clean the fuel tank
• Check the rear wheel toe-in.
• Change the hydraulic fluid.
• Change the hydraulic filters (sooner if the service interval indicator is in the Red
zone).
• Pack the rear wheel bearings
• Remove and clean the DPF (or as required)
• Replace the DOC
• Drain and clean the fuel tank
• Flush and replace the cooling system fluid.
• Drain and flush the hydraulic tank.
• Replace all moving hoses.
24