Key Switch; Headlight Switch - Toro 30864 Operator's Manual

Key Switch

The key switch (Figure 6) has three positions: Off,
On/Preheat, and Start.
Lower Mow/Raise Control Lever
This lever (Figure 6) raises and lowers the cutting decks
and also starts and stops the mowers when the mowers are
enabled in the mow mode. When starting the decks in the
down position, this lever will turn the decks on if the PTO
and the mow speed limiter are engaged.

Headlight Switch

Pivot the switch downward to turn on the headlights
(Figure 6).
Enable/Disable Switch
Use the enable/disable switch (Figure 6) in conjunction with
the lower mow/raise control lever to operate the mowers.
The mowers cannot be lowered when the mow/transport
lever is in the transport position.
InfoCenter
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics and
other information about the machine (Figure 6).
Hydraulic Filter Restriction Indicator
With the engine running at normal operating temperature,
view the indicator (Figure 7), it should be in the Green zone.
When the indicator is in the Red zone, change the hydraulic
filters.
1. Hydraulic filter restriction indicator
Power Point
The power point is a 12 volt power supply for electronic
devices (Figure 8).
Figure 7
1. Power point
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine (Figure 9) There
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
13
Figure 8
g020650
2
3
Figure 9
3. Middle button
4. Left button