Jacking Points; Tie Downs - Toro 30864 Operator's Manual

Important: Running the engine with the bypass
valve open will cause the transmission to overheat.

Jacking Points

Note: Use jack stands to support the machine when required.
•
Front—rectangular pad, under the axle tube, inside each
front tire (Figure 15).
1. Front jacking point
•
Rear—rectangular axle tube on the rear axle.

Tie Downs

•
Front—the hole in the rectangular pad, under the axle
tube, inside each front tire (Figure 16).
Figure 15
1. Front tie down
•
Rear—each side of the machine on the rear frame
(Figure 17).
1. Rear tie down
21
Figure 16
Figure 17