Specifications - Toro 30864 Operator's Manual

Accessing the Protected Menu Settings
To access the Protected Menu Settings
•
From the Main Menu, scroll down to the Settings Menu
and press the right button.
•
In the Settings Menu, scroll down to the Protected Menu
and press the right button.
•
To enter the passcode, use the center button to set the
first digit then press the right button to move on to the
next digit.
•
Use the center button to set the second digit then press
the right button to move on to the next digit.
•
Use the center button to set the third digit then press the
right button to move on to the next digit.
•
Use the center button to set the fourth digit then press
the right button.
•
Press the middle button to enter the code.
•
If the code has been accepted and the protected menu has
been "Unlocked", "PIN" will be displayed in the upper
right corner of the display screen.
The ability to view and change the settings in the Protected
Menu can be changed. Once the Protected Menu has been
accessed, scroll down to Protect Settings. Using the right
button, changing Protect Settings to OFF will allow the
ability to view and change the settings in the Protected Menu
without entering the passcode. Changing Protect Settings to
ON will hide the protected options and will require entering a
passcode to change the setting in the Protected Menu. After
the pass code has been set, the key switch must be turned off
and back on to enable and save this feature.
Note: If the passcode has been forgotten or misplaced,
please contact your distributor for assistance.
To Set the Counterbalance
•
In the Settings Menu, scroll down to Counterbalance.
•
Press the right button to select counterbalance and
change between the low, medium, and high settings.
To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20S, & 30S.
Stationary Regeneration
If the Stationary Regeneration icon appears on the InfoCenter,
refer to the Service Manual or contact your Toro Distributor
for the maintenance procedure.

Specifications

Note: Specifications and design are subject to change
without notice.
Transport Width
Width of cut
Length
Height
Fuel tank capacity
Transport speed
Mowing speed
Net weight*
* With cutting decks and fluids
16
226 cm (89 inches)
229 cm (90 inches)
320 cm (126 inches)
218 cm (86 inches)
51 liters (13.5 US gallons)
0–16 kph (0–10 mph)
0–13 kph (0–8 mph)
1,492 kg (3,289 lb)