Checking The Tire Pressure; Checking The Torque Of The Wheel-Lug Nuts - Toro 30635 Operator's Manual

Checking the Tire Pressure

Service Interval: Before each use or daily
DANGER
Low tire pressure decreases machine side-hill
stability. This could cause a rollover, which may
result in personal injury or death.
Do not underinflate the tires.
The correct air pressure in the tires is 172 to 207 kPa (25 to
30 psi).
Important: Maintain the recommended pressure in all
tires to ensure a good quality of cut and proper machine
performance. Do not under-inflate the tires.
Check the air pressure in all the tires before operating
the machine.
Figure 11
Checking the Torque of the
Wheel-Lug Nuts
Service Interval: After the first hour
After the first 10 hours
Every 200 hours
Torque the wheel-lug nuts to 115 to 136 N∙m (85 to 100 ft-lb)
in the order shown in
WARNING
Failing to maintain proper torque of the wheel-lug
nuts could result in personal injury.
Torque the wheel-lug nuts to the proper torque
value.
24
Figure 12 and Figure 13.
Figure 12
Front Wheels
Figure 13
Rear Wheels